Contact

The Use and Benefits Analysis of Stainless Steel Spiral Duct Machine

How can stainless steel spiral duct machine be used to play a greater role?


Low installation cost


The installation time of stainless steel spiral duct machine is only one-third of that of rectangular duct.


Usually only a small installation space is required


Without increasing additional installation space, stainless steel spiral duct machine can replace rectangular duct and occupies less space compared to rectangular duct.


Pressure drop


The pressure drop of stainless steel spiral duct machine is much smaller than that of rectangular duct.


Precision bite forming process


The molds used in stainless steel spiral duct machine are made of special steel. Even after several years of use, the surface of the mold can still remain unchanged, and the surface of the galvanized steel sheet will not be damaged. At the same time, the seams are smooth, tightly fitting, well connected, and have good sealing performance.


The leak-proof system of safety sealing ring adopts spiral reinforcement process


The stainless steel spiral duct machine process allows the spiral pipe to withstand greater pressure. The thickness of the bite joint is four times that of the pipe body, which increases the stiffness and superiority of the pipe, and the stainless steel spiral duct machine can withstand large pressure loads without damage or deformation. In addition, the material thickness can be reduced by 15% to reduce costs.


Less insulation material


The length of stainless steel spiral duct machine can reduce the insulation material accordingly.


What are the benefits of stainless steel spiral duct machine?


Oil fume emission


A large amount of oil fume is generated in the kitchen of hotels or restaurants, and the circular duct is used as an oil fume chimney. Here, the stainless steel spiral duct machine is called an oil fume chimney.


Dust removal


In some processing plants, there is a lot of floating dust. The stainless steel spiral duct machine requires professional ash removal equipment. For pipelines with large air flow, stainless steel spiral duct machine can be used.


Bulk material conveying


In the processing process of some factories, it is necessary to convey loose granular materials, especially those with relatively low specific gravity, such as foamed materials. Stainless steel spiral duct machine is low-cost and easy to use.


Air supply, including ventilation


For example, sending fresh air and exhaust gas. This range is very wide, such as gas in factory workshops and production sites. Stainless steel spiral duct machine is used because harmful substances need to be discharged to the outside, and outdoor air must be conveyed to the indoors. At this time, the air conveying pipeline with large flow and low pressure should be used. Stainless steel spiral duct machine is suitable. Usually, galvanized iron pipes are used, but in places with irritant and particularly high humidity, stainless steel spiral duct machine is used.


Send cold air


Generally, stainless steel spiral duct machine is the pipeline of central air conditioning. This kind of pipeline requires fireproof and insulation materials. The spiral duct can be internally attached with thermal insulation materials, which looks beautiful and generous.

Related News