Production Process and Processing Procedures of Air Duct Production Line 3

Table of Content [Hide]

The auto duct line 3 that produces and processes air duct can be used with TDF machine for flange forming, which is indispensable in the production of air ducts. If you do not know it enough, you will not be able to achieve the desired results. Let's learn more about the TDF machine of auto duct line 3.

Ⅰ. The production steps of the TDF machine of auto duct line 3

1. It is necessary to press into a piece of flange, then shape it after blanking and finally, press and install the four corners.

2. The flange is connected by a flange card. Cut it into uniform size for installation.

3. The TDF machine of auto duct line 3 is easy to operate, which improves the work efficiency. The size is also very accurate and the quality is high.

4. The TDF machine can be used in a variety of production equipment: iron shearing machine, lock former machine and so on.

Ⅱ. Maintenance and care of TDF machine of auto duct line 3

If we want to extend the service life of TDF machine of auto duct line 3, we must pay attention to the maintenance and care of TDF machine of auto duct line 3.

Usually we should put the TDF machine in a dry place. The TDF machine of auto duct line 3 should not be damp, and other impurities cannot enter the machine, which will make the machine easily damaged.

We need to add some lubricating oil to the TDF machine on a regular basis, so that the TDF machine can operate more efficiently, and check the machine nut for looseness at regular intervals to ensure safe use. Also, cleaning should be done regularly.

The production cost of the TDF machine of auto duct line 3 is relatively low, the sealing performance is good, and the installation is simple, which is an ideal equipment.

Ⅲ. The machining procedure of the TDF machine of auto duct line 3

1. Semi-finished products processing: number them according to the drawings designed by the customer, then cut, number, assemble, inspect, and ship them.

2. Finished product processing: measure the size and number according to the customer's construction drawing, then process it, and ship it after acceptance.

References