Contact
Focus Us On
DOWNLOAD

What are the Advantages of the Duct Line Produced by BLKMA

1. Power scrubbing is used in the duct line. The dirt is brushed with a pneumatic or electric brush, and then the dirt is sucked into the vacuum collector in the same way and direction as the gas rinse. This method requires as much care as possible not to destroy the surface of insulation materials.

2. Gas flushing is used in the air duct line. This method conveys compressed air by means of a hose with a nozzle connected to the air duct. The designed nozzle enables compressed air to drive out dust and dirt, while the dirt and dirt dried by compressed air can be conveyed to the vacuum collector along the air duct.

3. The duct line adopts vacuum suction. Using a vacuum suction pipe like a hand-held suction pipe to operate and brush to directly contact the inner wall of the pipe to clean up the dirt, this method requires that the air duct has a larger overhaul hole so that the operator can get as much as possible. But this method may leak out part of the dust and dirt because the duct cannot form the whole negative pressure condition.
Related News
  • Introduction to the Processing and Production of Flange Rings

    Introduction to the Processing and Production of Flange Rings

    June 27, 2019For the processing and production of large flange rings, the application of new technology and methods to reduce production costs, save energy and improve material utilization rate responds to the nat...view
  • Advantages and Applications of Hand Flanging Machine

    Advantages and Applications of Hand Flanging Machine

    July 30, 2018Hand folding machine is a combination of the advantages of various hand folding machines, its greatest advantage is that it has a movable, divisible upper mold, and can be adjusted according to the di...view
  • The Most Effective Way To Clean The Spiral Pipe Making Machine

    The Most Effective Way To Clean The Spiral Pipe Making Machine

    July 30, 2018The spiral pipe machine is mainly coated with a layer of zinc on the iron sheet to protect the sheet. After passivation, dying or coating of the photoresist, the zinc coating can significantly improve...view
  • Three Common Air Ducts

    Three Common Air Ducts

    July 30, 2018The air duct is a piece of work that ensures smooth ventilation, it's usually made of air duct processing equipment. It can be installed in buildings, air conditioning, smoke vents and other places, t...view
  • Do You Still Not Know The Flange Forming Machine?

    Do You Still Not Know The Flange Forming Machine?

    July 30, 2018The flange forming machine is a high-efficiency edge coiling device, which rolls carbon steel, stainless steel and non-ferrous metal profiles to rings and flanges. The diameters of these rings and fla...view
  • Precision of Hand Folding Machine

    Precision of Hand Folding Machine

    July 30, 2018The hand folding machine should judge its precision from the precise position it has achieved. Therefore, the precision of the hand folding machine should be carefully checked. The precision of the ha...view