Maintenance Method of Electric Shearing Machine

In the process of manufacturing air duct, the electric shearing machine adopts clutch structure and open gear transmission in the form of resistance bonding, and adopts advanced electrical appliances (foot switch and manual switch) for operation, with low noise and convenient operation and maintenance. All steel welding structure is adopted with simple structure, simple operation, beautiful appearance and low energy consumption.

The electric shearing machine is mainly used for plane cutting, and its maintenance methods are as follows:
1. Operate in strict accordance with the operating procedures.

2. Before starting the machine, add lubricating oil at fixed time, fixed point and fixed quantity according to the requirements of lubrication chart. The oil should be clean and free of sediment.

3. The machine tool must always be kept clean, and the unpainted part should prevent rust and grease.

4. The lubricating oil in the motor bearing should be replaced and filled regularly, and the electrical equipment should be checked regularly to see if it is safe and reliable.

5. Regularly check whether the triangle belt, handle, knob and key are damaged. If the wear is serious, it should be replaced in time and reported to the spare parts for supplement.

6. Regularly check and repair the switch, safety and handle to ensure their reliable operation.

7. Lubricate and clean the machine tool 10 minutes before going off work every day.

8. It is strictly forbidden for non-designated personnel to operate the equipment. Normally, people must turn off machine when they leave.

Anhui Blackma Heavy Industrial Machinery Co., LTD. can provide you with some purchase suggestions of electric shearing machine according to your needs. You can also visit our factory. Our products are absolutely reliable. If you need any help, please contact us.